Gateways
Raspberry PI
Raspberry PI
You can have one or many Raspberry PI gateways in one installation.


Buy it from:  https://www.farnell.com/

Z-wave devices
Z-Wave USB Stick connects any computing platform with USB interface to a wireless Z-Wave network. You need this for your RaspberryPI to connect wireless Z-wave devices.

Buy it from:

http://store.zwaveeurope.com/product_info.php?products_id=12946
Fibaro Wall Switch for Plug Type F is highly functional wall plug and can be applied wherever you want to control electrical devices, while monitoring power consumption in a convenient way.

Buy it from:
http://store.zwaveeurope.com/product_info.php?products_id=12926 
Fibaro Motion Sensor
(4-in-1 Multi Sensor) GEN 5
detects motion, measures tempreature and brightness levels and has vibration sensor to detect tampering of the device itself

Buy it from:
http://store.zwaveeurope.com/product_info.php?products_id=13141 
Fibaro Door/Window Sensor
The sensor expands the capabilities of the
system by monitoring the opening of doors,
windows and garage doors. It is used in
automatic light control, access control and
home security systems.

Buy it from: 
http://store.zwaveeurope.com/product_info.php?products_id=13271
Fibaro Smoke Sensor is an ultra light device, that is battery powered for maximum protection from flaming and smoldering fires.

Buy it from:
http://store.zwaveeurope.com/product_info.php?products_id=12927 
Fibaro Flood Sensor will alert you of a threatening flood or a rapid temperature rise or drop.

Buy it from:
http://store.zwaveeurope.com/product_info.php?products_id=13278 
1-wire
DS18B20 Programmable Resolution 1-Wire Digital Thermometer provides 9-bit to 12-bit Celsius temperature measurements.


Buy it from:
http://www.farnell.com/
DS2406 Dual Addressable 1-Wire Switch Plus Memory offers a simple way to remotely control an open drain transistor and to monitor the logic level at transistor's output via the 1-Wire® bus for closed loop control.

Buy it from:
http://www.farnell.com/
Wired Devices
PiFace Digital 2 is designed to plug on to the GPIO of your Raspberry Pi B+, allowing you to sense and control the real world of wired devices. You can detect the state of a switch, for example from a door sensor, a pressure pad or any number of other switch types and you can respond to that switch state. You can drive outputs to power motors, actuators, LEDs or anything you can imagine.

Buy it from:
http://www.farnell.com/